SpaceMouse Destroyed for Science - The SpaceMouse is an interesting gadget beloved by engineers and artists alike. Th... - https://hackaday.com/2025/04/16/spacemouse-destroyed-for-science/ #peripheralshacks #analogjoystick #lightmeter #spacemouse #joystick

The rubber from the circle pad on my 3DS fell off, the robber has some tears on it so it will not stay one even if I put it back. I tried to use it with like that, but it was too slippery and my finger started to hurt after an hour of play session. Probably I could just leave to be like that, but I thought since there's replacement ones sold even if those are not original I will be better of with them then the original without its rubber.

Der traurige Versuch, den PCB-Bestückungsservice von SeeedStudio zu nutzen

Viele Leiterplatten-Dienstleister bieten auch einen Bestückungsservice an, was gerade bei SMD-bestückten Leiterplatten sehr attraktiv klingt. Und das wollte ich schon lange einmal selbst ausprobieren…

#1351 #adapter #Assembly #commodore #Fusion #joystick #Libraries #Mouse #Open #OPL #Part #PCB #SeeedStudio #Service #Test #usb

https://dirkwouters.de/the-sad-attempt-to-use-the-pcb-assembly-service-of-seeedstudio/

“It’s not a trick, it’s a…” – PSX64 adapter für C64 & Co.

“Oh nein, nicht noch ein Joystick-Adapter” – ich höre schon die Unkenrufe aus dem Hintergrund. Aber diesmal geht es nicht um einen weiteren USB-Joystick-Adapter für den PC, sondern um einen Joystick-Adapter für alle Heimcomputer mit D-SUB9-Schnittstelle, wie er bei Atari und Commodore zu finden…

#adapter #commodore #DSBUB9 #Gamepad #joystick #Playstation #PSX64

https://dirkwouters.de/psx64-adapter/

USB 2X Joystick Adapter selbst gemacht

Um einen alten Joystick, wie den Competition Pro, an einen modernen PC anzuschließen, brauchen man einen Adapter. Das liegt daran, dass die alten Joysticks von Heimcomputern eine Schnittstelle haben, die heutige Computer nicht mehr ha…

#adapter #Atari #avrdude #Basteln #Blog #commodore #db9 #diy #Hardware #Homecomputer #joystick #löten #Mikrocontroller #Projekt #retro #Sinchai #smd #Spielen #usb

https://dirkwouters.de/2x-usb-joystick-adapter/

Znacie akcję kanału #90’ #nostalgia z YouTube, który chce kupić wszystkie odcinki archiwalne programu #TVP #Joystick. Aktualnie ma ich 20 i zbiera na dokupienie kolejnych. W nich recenzje Kazimierza Kaczora gier takich jak #Harpoon, #SilentService i innych reliktów z ery #DOS.

https://youtube.com/@90_nostalgia

Make Tower Controller Again

#retro #retrogaming #joystick #commodore #atari #c64 #atarivcs2600plus

See that Joystick at the bottom of the picture? I found a second one coming to me in a few days. I am happy :-) ...

Okay, I guess a video says more than words. Here's the #MSX #ROM of #PacMan running on my #rc2014 - it's a #RomWBW machine with a #TynemouthSoftware #Joystick module and the latest #TMSemu by @shieladixon - no other MSX-related or otherwise "non-common" modules on the system.

What the video shows is that #MSX8 is actually doing its stuff, running the original MSX game. But as you can also see, the player (Pac Man) is always moving up.

I can make it go down, but as as soon as I release the stick, it goes up again. Also, I can only move up and down and this is done by moving the Joystick to either the left or the right.

I have checked the MSX8 bios.asm code for the MSX8CPMRC2014 build of MSX8 BIOS and while it should be working, it isn't.

I did hard-code the address of my joystick module ($01) at line 4848 in bios.asm to get the input from it, but somehow the mapping of the MSX specific "keys" or "inputs" like Up/Down/Left/Right is not properly working. Oh, and it seems that Fire Button 1 is always pressed as well.

So, long story short: it should be possible to make MSX8 work without the need for special modules, but right now I'm a little lost as to how to modify the code to get proper input readings.

P.S.: you can modify the bios.asm code to use W/A/S/D instead of a joystick jumping to KBDJSTK instead of JSTK. But even then the controls behave in the same insane way as explained above.

Any help or even cooperation is welcome, let's make MSX games rock on RC2014 !!

Guten Morgen, ich brauch mal jemanden, der ein kleines teil für ein joystick mit einem 3D Drucker erstellt. Wollte ein bild von dem ganzen posten, aber denke das kann ich besser nachen, wenn sich jemand meldet. Das teil ist nicht gross, so 5 x 5 x 2 cm gross, ca.. Das Teil ist für ein Turtle Beach joystick.

#3druck #joystick #knüppel

PS: hab eine helfendene Hand gefunden, danke allen fürs teilen. Ihr seit super

Do you hate holding your #Atari #joystick in your lap? Then, you need a Grand Stand. https://computeradsfromthepast.substack.com/p/the-grand-stand #computerad #computermagazine #computerhistory #videogames

I'm delighted to announce my latest hack for BBC Micro Elite.

The Delta 14B is a joystick with 14 buttons. This is the perfect stick for playing Elite, so I've hacked the Elite Compendium so you can now fly your Cobra Mk III without having to keep reaching for the keyboard.

See https://elite.bbcelite.com/hacks/elite_compendium.html for more information, download links and details on what you need to get this working.

Right on, Commanders!

There is an #Atari CX-10 #Joystick decanter set with glasses!

https://atari.com/products/atari-joystick-decanter-set

The new #RC2014 #Joystick #Interface by #TynemouthSoftware works fine with #TutTut - hopefully I get beyond the second stage this time, now that I can play with a real Joystick ( #ArcadeR )

So now I have an "official" RC2014 "gaming system" ... heh ...

En novembre 2018, pour les 30 ans de #Joystick (qui aurait donc eu 35 ans dans deux mois), j'avais commencé sur Twitter un thread où je postais encore jusqu'au début de l'été, tous les mois, la couv d'il y'a 15, 20, 25 et 30 ans...

Le dernier post du thread : https://twitter.com/Joystick_lemag/status/1675076779088781312

Puisque Twitter n'est plus je vous propose de continuer ici !