veganism.social is one of the many independent Mastodon servers you can use to participate in the fediverse.
Veganism Social is a welcoming space on the internet for vegans to connect and engage with the broader decentralized social media community.

Administered by:

Server stats:

296
active users

#engines

1 post1 participant0 posts today
Replied to Spaceflight 🚀

🇨🇳 Niobium-silicon alloy can withstand temperatures exceeding 1,700 degrees Celsius 🌡️.
Lighter than the nickel or titanium #alloys that are commonly used today, and with three times the compressive strength at high temperatures, #engines made of such a material would be able to reach speeds and operational efficiency that are impossible with existing technology scmp.com/news/china/science/ar

South China Morning Post · ‘Gift from heaven’: China astronauts develop super niobium alloy for aerospaceAn experiment conducted in space has helped Chinese scientists do the impossible – and it could revolutionise aerospace technology.

#engines nerds. I need a new alternator for an old boat. Most online are for modern cars with flat multi-vee belt pulleys. Are the tapered shafts normally made to a common standard so I could remove the pulley and fit the old vee belt pulley from the old alternator? Or are they all different to make life more 'fun'?

Replied to Chuck Darwin

Efficiency gains from engines will still be vital for the industry.

The most marked change in the appearance of #engines could be the return of the open #propeller.

The design dispenses with the #nacelle
– the cover
– to allow for a bigger fan that offers more propulsive force.

Superficially, it will look like existing turboprop engines,
but with the ability to fly at Mach 0.8, or 80% of the speed of sound
– the same as current jet engines.

#CFM, a joint-venture between America’s General Electric and France’s Safran, has said that its open fan #Rise engine could theoretically reduce fuel consumption and carbon emissions by 20%.

The company says it can reduce noise, which put paid to a previous prototype in 1986.

It will still have to persuade regulators and passengers that the engines will be safe if a blade breaks in midair.

As well as radical changes to airframes or engines, manufacturers are constantly looking for ways to salami-slice #fuel burn via small gains.

#Winglets, the curved tips of wings, were first introduced in the 1970s in response to the then oil crisis,
mimicking birds’ wings to reduce drag.

The split winglets on the 737 family since 2014 can reduce fuel burn by as much as 2% during a long journey, according to the Seattle-based manufacturer Aviation Partners.

(For plane-spotters, they double as the easiest way to distinguish a 737 from an A320.)

Birds have had millennia to evolve the ideal features for efficient flight,
so aviation designers have constantly used them for inspiration.

Airbus is experimenting with #gust #sensors on the front of the aircraft to register during turbulence,
with automatic responses from control surfaces of the wing,
similar to a bird’s constant adjustments to movements in the air.

#Concorde, which flew on only a limited number of routes, was the last passenger plane in service with a truly distinctive design.

The supersonic jet, which had swept-back, delta wings, was retired in 2003.

#Boom #Supersonic, a startup, is testing the technologies for a proposed “son of Concorde” with a similar look.

That plane would only ever be a niche service, flying 80 passengers at a time on premium routes.

But there is a possibility that Boeing and Airbus take radically different approaches to the workhorses that carry billions of passengers each year.

If the manufacturers go in different directions, then passengers might start paying serious attention to plane design, says Addison Schonland, an analyst who tracks the industry at AirInsight.

“I don’t think we’ve ever had a situation before, to look at an aeroplane and say, ‘that’s completely different’,” he says.

“How will people react to seeing those novel shapes?”

(3/3)
#Airbus #JetZero #Delft #University #McKinsey #fuel #efficiency #Boeing #truss #transonic

Ich denke, der Übergang zur Elektromobilität ist mir u.a. auch darum leicht gefallen, weil die Verbrennungsmotoren auf die ich stehe (Luftgekühlte Boxer, Saugdiesel und Sternmotoren) eh schon länger nicht mehr verbaut werden.

Wenn ich mir schon neumodischen Schnickschnack kaufe dann nicht so alberne aufgeladene Einspritzer, sondern ne Elektromaschine mit linearem Drehmoment über den gesamten Drehzahlbereich.

I have a dumbass question about (car) engines.

When you press the throttle, I bet the sound that you hear is mostly the combustion happening inside the cylinders, right.

BUT when you release the throttle, while the revs go down, though the sound gets less loud, you still hear some sound! Does that mean that

* there's still some combustion happening even though you released the throttle? or
* is it just the mechanical movements of the engine that still make a lot of noise?

🔬 Renewable Methanol as a Fuel for Heavy-Duty Engines: A Review of Technologies Enabling Single-Fuel Solutions

mdpi.com/1996-1073/17/7/1719

MDPIRenewable Methanol as a Fuel for Heavy-Duty Engines: A Review of Technologies Enabling Single-Fuel SolutionsTo meet climate targets, a global shift away from fossil fuels is essential. For sectors where electrification is impractical, it is crucial to find sustainable energy carriers. Renewable methanol is widely considered a promising fuel for powering heavy-duty applications like shipping, freight transport, agriculture, and industrial machines due to its various sustainable production methods. While current technological efforts focus mainly on dual-fuel engines in shipping, future progress hinges on single-fuel solutions using renewable methanol to achieve net-zero goals in the heavy-duty sector. This review examines the research status of technologies enabling methanol as the sole fuel for heavy-duty applications. Three main categories emerged from the literature: spark-ignition, compression-ignition, and pre-chamber systems. Each concept’s operational principles and characteristics regarding efficiency, stability, and emissions were analyzed. Spark-ignition concepts are a proven and cost-effective solution with high maturity. However, they face limitations due to knock issues, restricting power output with larger bore sizes. Compression-ignition concepts inherently do not suffer from end-gas autoignition, but encounter challenges related to ignitability due to the low cetane number of methanol. Nonetheless, various methods for achieving autoignition of methanol exist. To obtain stable combustion at all load points, a combination of techniques will be required. Pre-chamber technology, despite its lower maturity, holds promise for extending the knock limit and enhancing efficiency by acting as a distributed ignition source. Furthermore, mixing-controlled pre-chamber concepts show potential for eliminating knock and the associated size and power limitations. The review concludes by comparing each technology and identifying research gaps for future work.