Create accountLogin

Recent searches

No recent searches

Search options

Only available when logged in.
veganism.social is one of the many independent Mastodon servers you can use to participate in the fediverse.
Veganism Social is a welcoming space on the internet for vegans to connect and engage with the broader decentralized social media community.

Administered by:

Server stats:

196
active users

veganism.social: AboutStatusPrivacy policy

Mastodon: AboutGet the appKeyboard shortcutsView source codev4.3.7

#behringer

0 posts0 participants0 posts today
Public
Francois Dion

I'm putting some remix, edits and alternate takes on my "Lunchbox" playlist.

Just put up "LFO Infusion Tisane (with Caffeine Beats)" adding drums to my original LFO Infusion Tisane track.

Drums are Univox SR-95 aka Korg Mini Pops 7 aka Jean-Michel Jarre signature drum machine (I think Michael Garrison used the Univox version)

#synth #drummachine #korg #univox #behringer #neutron #analog #music #electronicmusic #ambient #semimodular #electronica #livetronica #jarre

soundcloud.com/francois_dion/l

SoundCloudLFO Infusion Tisane (with Caffeine Beats)A remix of "LFO Infusion Tisane" with drums (https://soundcloud.com/francois_dion/lfo-infusion-tisane?in=francois_dion/sets/lunchbox) Another lunchtime experimentation, this time using a Behringer Ne
Continued thread
Public
Francois Dion

The main purpose of this auxiliary row of #eurorack #modules is to sequence notes CVs and modulation CVs for my 2600. S&H & LFOs are great for some modulations, but sometimes you need specific voltages in a specific sequence. Enter the #behringer #arp2500 1027 Clocked Sequential Control Module. It can sequence 3 different groups of up to 8 steps (position gates allows resetting the sequence at any step, although on all 3 sequences at once).

More than 8 steps? see next

modulargrid.net/e/behringer-10

ModularGridBehringer 1027 Clocked Sequential Control ModuleBehringer 1027 Clocked Sequential Control Module - Eurorack Module - 2500 Series Analogue Step Sequencer
Public
Francois Dion

Some do ask really good questions too. #soundcloud #music #synth

soundcloud.com/francois_dion/c

"Crawfish Bucket Brigade Part I" was all done on the #Behringer #Neutron. It is monophonic, (well, technically paraphonic 2 voice), but the filter can be mixed separately and then there is the noise source and the bucket brigade delay itself brings another layer, and depending on the mix level, a variety.

"How do you have tones, chirps, drones and noise all at once with just a monophonic synth? That's fascinating"
Public
Francois Dion

"Crawfish Bucket Brigade".
Another track added to my Lunchbox playlist. And another food related title, with a link to #synthesis and #effects

This one is the first part of two tracks I recorded on the #behringer #neutron, using the same basic sequence from a #korg #sq1, but with a different feel between the two parts.

No drums, as I relied completely on the Neutron 2 oscillators for all sound generation. #music #soundcloud #livetronica #electronica #electronicmusic

soundcloud.com/francois_dion/c

SoundCloudCrawfish Bucket Brigade Part IOnce more, the battery powered portable studio strikes back. Behringer Neutron doing the sound generation, Korg SQ1 some very basic sequencing and controlling the bucket brigade delay of the Neutron.
Public
Eryck Gu⸸⸸eЯaL

Woo! All my custom string sets from #DRstrings finally came in. Along with the tapewounds from #LaBella. Maybe tonight I'll throw them on.

Also, bought a Greco GS940 #semihollow #shortscale #bass that I'm going to convert into a #fretless #cello. That'll arrive in a few weeks.

Another #electricBass will be on it's way soon. Details to follow. 😜

Oh. I decided on a whim to buy a new used #Behringer graphicEQ and #DBX compressor+limiter+noise gate. I feel like I stole them they were so cheap but, I know they were sitting around for a long time.

Traded in a hard case that came w/ my #Ibanez bass.

It's certainly been a #NGD #newGearDay !

top down view of several boxes of bass guitar strings in a box
close up of the body of a semi hollow bass from the 60s or 70s showcasing the brown lines of the wood grain
two rack mount units sitting atop one another just waiting to be put up!
#musicEquipment
Public
Dendrobatus Azureus

Bass Guitar Amplifier Adjustment

Adjusting a bass guitar amplifier involves setting the EQ (equalization) and other controls to get the best tone for your style, venue, and preferences. Here’s a step-by-step guide to dialing in your bass amp settings:

1. Set Initial Controls
Gain: Start with the gain at a low level. Increase it gradually until you hear distortion, then back off until the sound is clean. If you prefer a grittier tone, leave the gain slightly higher.
Volume: Set the volume to a comfortable level. Adjust it based on your playing environment, such as practicing alone or playing with a band.
2. Adjust EQ (Bass, Mid, Treble)
Bass: Controls the low-end frequencies. Increasing the bass can add warmth and depth. For a more defined sound, avoid cranking the bass too high, as it can make the sound muddy.
Mids: Mids are essential for a clear and punchy tone, especially in a mix. Higher mids add clarity and presence; reducing them can create a scooped sound often used in slap bass.
Treble: Controls the high-end frequencies. Increase it for more clarity and definition, or roll it back for a warmer sound.
3. Use Shape/Contour Controls (if available)
Many bass amps have a "shape" or "contour" control that adjusts the mids for different tones. Experiment to see how these affect your sound, especially if you want a quick, scooped tone.
4. Experiment with Extra Features
Compression: Some amps have a built-in compressor, which smooths out your dynamics and adds sustain. Start low, increasing only until it’s just noticeable.
Drive or Overdrive: If you like a more aggressive, gritty tone, use the drive/overdrive knob to add subtle distortion.
5. Room Acoustics
Adjusting your EQ based on the room’s acoustics is important, especially for live gigs. Rooms with a lot of bass resonance may require turning down the low-end or cutting certain frequencies.
6. Test and Fine-Tune
Play different styles and techniques, like slap, fingerstyle, and pick, to see how your tone holds up.

#Music#Audio#Bass
Continued thread
Public *
Radio Azureus

I am going to link a long article here which I need to post on another Fediverse account

This post does not come from my brains; I've copied it over after I've seen that everything checks out as factual.
The post is from another Network

mastodon.bsd.cafe/@Dendrobatus

BSD.cafe Mastodon PortalDendrobatus Azureus (@Dendrobatus_Azureus@bsd.cafe)Bass Guitar Amplifier Adjustment Adjusting a bass guitar amplifier involves setting the EQ (equalization) and other controls to get the best tone for your style, venue, and preferences. Here’s a step-by-step guide to dialing in your bass amp settings: 1. Set Initial Controls Gain: Start with the gain at a low level. Increase it gradually until you hear distortion, then back off until the sound is clean. If you prefer a grittier tone, leave the gain slightly higher. Volume: Set the volume to a comfortable level. Adjust it based on your playing environment, such as practicing alone or playing with a band. 2. Adjust EQ (Bass, Mid, Treble) Bass: Controls the low-end frequencies. Increasing the bass can add warmth and depth. For a more defined sound, avoid cranking the bass too high, as it can make the sound muddy. Mids: Mids are essential for a clear and punchy tone, especially in a mix. Higher mids add clarity and presence; reducing them can create a scooped sound often used in slap bass. Treble: Controls the high-end frequencies. Increase it for more clarity and definition, or roll it back for a warmer sound. 3. Use Shape/Contour Controls (if available) Many bass amps have a "shape" or "contour" control that adjusts the mids for different tones. Experiment to see how these affect your sound, especially if you want a quick, scooped tone. 4. Experiment with Extra Features Compression: Some amps have a built-in compressor, which smooths out your dynamics and adds sustain. Start low, increasing only until it’s just noticeable. Drive or Overdrive: If you like a more aggressive, gritty tone, use the drive/overdrive knob to add subtle distortion. 5. Room Acoustics Adjusting your EQ based on the room’s acoustics is important, especially for live gigs. Rooms with a lot of bass resonance may require turning down the low-end or cutting certain frequencies. 6. Test and Fine-Tune Play different styles and techniques, like slap, fingerstyle, and pick, to see how your tone holds up. #Music #Audio #Bass #ShortScale #Behringer #Guitar #SoundEngineering #Joyo #Pedal
#Music#Audio#Bass
Public
Francois Dion

"Hot Sauce Feedback"

Another experiment in #minimalist #ambient #music with the portable #Behringer #Neutron. The built in delay & distortion built into it helps a lot, I don't have to carry much to make complete tracks. Sequenced from the #Korg SQ1. Recorded in the great outdoors directly to a Tascam digital recorder. Great North Carolina weather recently, so these sessions are doubly enjoyable.

#eurorack #semimodular #portable #studio #experimental

soundcloud.com/francois_dion/h

SoundCloudHot Sauce FeedbackOnce more, the portable studio returns, with a Behringer Neutron semi-modular synth, driven by a Korg SQ1 control voltage sequencer, all battery powered. Recorded in the great outdoors directly to a T
Public
schamspeare

Well, as a follow-up to my 909 / 808 poll, here’s the result of much humming and hawing.

Love it so far, particularly its size and the nice interplay between closed and open hats. You can really make delicious grooves.

Niggles: I wish it had the 909’s tight snare and rim shot. Wish the tom tuning was a bit wider, and that toms had decay control. Also wish drum settings were saved with song or pattern saves, but that’s asking for something not in the original.

#behringer#synth#drummachine
VegansExploreLive feeds
About